Tips for using semi-trailer
1.How to eliminate the vibration and noise of semi-trailer wiper blades:Use pliers to reduce the gap between each joint and the rubber clip.
2.How to extend the service life of light bulbs:After buying a car or replacing a new light bulb,wipe the bulb with alcohol to eliminate fingerprints and oil stains.
3.How to reduce tire noise of semi-trailer:Stick a layer of black felt or velvet cloth on the inner protective plate of the front wheel.(Carefully understand that your tire noise decreases after rain and increases after washing the car,due to the mud on the inner protective plate absorbing the noise).
4.How to extend the service life of a muffler:Drill a small hole under the muffler.The reason is simple:drainage and corrosion prevention.
5.How to start and accelerate quickly:When the vehicle is unloaded or under low load,start directly in second gear(without worrying about damage to the vehicle,as the first gear and clutch are designed for heavy load conditions,and most cars have difficulty shifting from first gear to second gear).After reaching over 3000 rpm,quickly push into third gear,and then reach over 3000 rpm.At this point,ordinary cars will fall behind you.Switch calmly to fourth gear,fifth gear,or directly to fifth gear.
6.How to improve the air circulation and defrosting effect inside the semi-trailer:Replace the dust filter element(in the engine compartment)with a sponge of the same size,which not only increases the air intake,but also can be disassembled and washed for reuse.In addition,the defrosting inside the car is fast in winter,so there is no need to turn on the fan when driving long distances,and it is also fuel-efficient.
7.What to do when you feel that the brakes are not as effective as before:While waiting for a red light,use a few strong steps on the brakes to take effect and rejuvenate.
8.How to easily avoid semi-trailer deviation:1.Increase the air pressure of the front wheels in the direction of deviation or decrease the air pressure of the tires in the other direction;2.Adjust the toe in within the scope of the rules.
9.How to avoid water accumulation in the external reversing mirror of a semi-trailer:Make a small hole under the reversing mirror(larger is also acceptable).Due to the fact that every time you start racing after washing your car,water will splash onto your body from the rearview mirror,which is very annoying.
